Company Presentation

Strapping Machines Products

Our range of strapping machines is durable, sturdy and imparts efficient performance. These strapping machines are capable of allotting, tightening and fastening polypropylene straps around the packages, automatically. Its heater assists in applying pressure on the strap and connects the ends with heat welds. Semi automatic strapping machine power switch have inbuilt sensors that makes the motor to switch off while not working and again restarts automatically with the insertion of strap. Our range comprises of :



Introducing the new iQ-400 Semi Auto Strapping Machine, StraPack's new semi-automatic strapping machine with dual tension mode. This allows for a wide variety of applications with just a flick of a switch.

  • The iQ-400 Semi Auto Strapping Machine is a durable and heavy-duty strapping machine designed to withstand various harsh environments.
  • The iQ-400 Semi Auto Strapping Machine is yet amazingly quiet to operate and well suited for office use also.
  • The iQ-400 Semi Auto Strapping Machine has less moving parts, which makes it easy to maintain and keeps the operation cost low.
  • All electric parts are arranged in one side of the machine, enclosed in the cabinet, for easy maintenance and protection of crucial parts.
  • The iQ-400 Semi Auto Strapping Machine runs strap from 5 millimeters to 15.5 millimeters (5/8 inches) without additional parts.
  • The torque tension mode is suitable for stronger tension or to strap compressible packages, while the stroke tension mode is best for soft tension or quick operation.
  • Tool-free access to frequently accessed areas for easy maintenance.
  • Hinged tables are easy to remove for daily maintenance.

Features :

  • Quick Start Up (just 45 seconds)
  • Runs PP strap from 5mm - 15.5mm (200mm core) without change parts
  • Torque Mode (for stronger tension, or to strap springy packs) or
  • Stroke Tension (for delicate packs)
  • Tension up to 450N (45.9kgf)
  • Compact: W780mm x D540mm x H777mm (with work guides)
  • Table Height: 752mm
  • Quiet: Only 57 dB
  • Light: Only 56kg
  • Energy efficient: Only 0.25Kw  
  • Min Pack Size W100 x H30mm  
  • Minimal moving parts (easy to maintain, low operation cost)  
  • Tool-free access to frequently accessed areas (easy maintenance)  
  • All electric components in enclosed cabinet on one side of the machine (easy maintenance)  


  • Can be supplied with side and rear panels
  • Support Plates to stabilise taller packs, leaflets or banknotes
  • Adjustable Legs to adjust table height from 755 - 925mm (not available with side and rear panels)





780 mm

775 mm(with work guide)

543 mm

56 kg.

30-3/4 in.

30-1/2 in.(with work guide)

21-3/8 in.

124 lbs.

Table Height 750 mm 29-1/2 in
Min. Package Size

W 100 X H 30 mm

heat seal / polypropylene

W 3-7/8 X H 1-1/8 in.
Joint / Strap/ Coil ID 200 or 230 X W 200 mm 8 X 8 or 9 X 8 in.
SStrap Tension Max. 500 N (51 kgf) or 150mm stroke Max. 112 lbsf. or 6" stroke
Power Supply 100-120, 200-240 V 1 Phase 50 / 60 Hz 0.25 kW

Machines supplied by Compak :

Following are the types of Semi-Automatic Strapping Machines supplied by Compak :

  • D-53M2
  • D-53LB
  • D-53M
  • D-53NA
  • D-53RS
  • D-53X2
  • D-53Y

Features :

  • Standard accessory, its advantage is stable quality, and durability.
  • Special design-Control PP straps cooling time. It can make the PP strap to fasten well in any time.
  • "Electricity-saving" device, the motor automatically stops running after 60 seconds pause to reduce the normal wear and to prolong the life of machine.
  • The advanced P.C.B microchip circuit board control system, less malfunction and easy maintenance.
  • Durable electro-magnetic clutch transmission, lesser wear and lower noise.
  • Non-fast heater plate, it will increase the work efficiency.
  • Installing an auxiliary feed switch and cut switch at the control panel makes you operate more conveniently.
  • Small volume to save space.
  • Outstanding exterior; ingenious design; steady and durability; save space & carry conveniently.
  • Use of 6m/m PP strap to save cost. 


We provide different types of Fully Automatic Strapping Machines at very cost effective prices. Following are the types available in this model :

  • AQ-7
  • AQ-7M
  • AQ-7RS
  • F-15
  • F-18
  • F-18FB
  • JK-5000
  • JK-5000SUS

Features :

  • The brush guiding mechanism ensures the strapping at the proper position and not to slant. Brilliant performance.
  • Rapid speed: 2.4 sec/per cycle, 25 cycles/per min.

Minimum Maintenance

  • These require minimum maintenance, no greasing and are easily operational.

Tension Adjustment

  • Can be adjustable at will, Max. Tension is over 90 kgs.

Precision Structure

  • Its components are made of aluminum alloy and Control System is compatible.
  • Add on a safety device, built for 24 hrs continuous operation.

Easy Loading or Unloading

  • Dispenser is placed outside to offer easier loading and unloading.

Extensive Applications :

  • Can be independent operation or combine with other machines for unmanned production or auto packaging systems.
  • Removable aluminum arch.
  • Decrease the dimensions of the package and transportation cost.
  • Precisely strapping positions.
  • Low damage.

Options :

  • If the working height is between 730 to 800mm, the casters should be placed outside.
  • Detection for strap not feeding to origin or arch properly.
  • Detection for non-strap.
  • The breaker for electric leakage and safety switch.
  • Option for 406Ø or 280Ø dispenser.
  • Available for PET/PP.